When I was sewing up a diaper bag the other day, I realized how many things are involved in bag-making that I just had to discover myself along the way. I also thought that if someone had just shown me a few things, it could have saved me some headache early on in my sewing life.
I always hesitate to give sewing tips because I know there are so many of you out there who have been sewing much longer than I have and will probably laugh at the way I do things. But, I’ll risk it and hope that I might give a tip or two that might help someone out.
So here goes, Tip #1: Installing a Magnetic Snap:
I’m all about sturdiness. I don’t want to make a bag, just to have the fabric around the magnetic snap fall apart and make the bag look bad. Here’s how I do it.
1. I never install a magnetic snap on just fabric alone. Even if the fabric is heavy canvas, I always interface it – at least the small area where the snap is going to be installed.
2. I measure to the spot where the pattern tells me to place the snap. I mark a dot on this spot.
3. Then, I take the washer from the magnetic snap and place the center hole on the dot. Then I make 2 marks in the slits on the sides of the washer. This is where the holes will need to be cut.
4. On my machine, I make 2 buttonholes around these lines and slit the holes open with the seam ripper.
5. Place the prongs through the holes. Place the washer over the prongs.
6. Bend the the prongs toward the middle of the magnet using something firm, but not slippery. (Hint: don’t use the handle of the rotary cutter – it’s just not safe!)
7. Repeat with opposite side of magnetic snap.
8. Get snap-happy and start putting snaps on EVERYTHING: purses, bags, drawing cases, patchfolios, etc.
Cheap sourses for purchasing snaps:
1) Ah Kwok Supplies. It’s an Ebay store out of Hong Kong. Even with shipping, when I buy 25 half-inch snaps, I end up paying about $1 per snap which is a better deal than I can get anywhere else.
2) Joann’s has magnetic snaps in their notions section, but if you want a cheaper option, head on over to the craft side of the store where they sell bag making supplies (handles and kits). They aren’t my favorite snap (they’re thick), but you can often get 3 snaps for under $3.
3) Etsy. Several etsy shops carry magnetic snaps inexpensively now. Search “magnetic snaps” under supplies.
Never thought about buttonholeing (is that a word?) the slits. Top tip missus.
That’s a great idea – I never would have though of doing the buttonhole thing but it’s very clever!
For extra support, I cut out a small piece of needle point mesh and insert the magnetic snap in the middle of this. This gives reinforcement with repeated opening and closing a bag.
Thanks for sharing the buttonhole tip – I’ve never thought of doing that!
Please don’t stop giving hints. That was a great one.
Wow, buttonholes! You are very conscientious. I do everything the same, except I use a piece of Peltex or something else stiff behind the snap, don’t do buttonholes (lazy butt, to borrow a phrase from your sister) and I bend the prongs outwards instead of inwards. I wonder if there is a difference between bending them in vs. out?
What a great idea using buttonholes for the prongs!
A word of warning though. You can’t use magnetic snaps on wallets if you want to use it to store credit cards. The magnets will wipe the information from the black strip!!!!
Great tips and thanks for sharing…like others I had never thought of the button hole for the prongs. The rotary blade tip is too funny, lots of bad things can happen with a rotary blade. 🙂
Great tips and thanks for the Ebay source! Marking the spots first is a good idea. I’m always trying to eyeball it and that doesn’t work well. 🙂
Thanks for the tips…I never thought of using a pen and marking the slits (let alone buttonholing them), just foolishly making a dot with my fingernail.
You’re so good to do buttonholes, I just use a seam ripper to make the slit and the add a little piece of timtex before I close the prongs. It never occured to me to do a buttonhole – you’re so clever 🙂
Thank you! Earlier this week, literally, I was thinking I’d rather have a magnetic snap on a bag and wondering how I would do it and if it would be worth it. Now I know.
You know, I always bent my prongs to the outside. It wasn’t until I saw Autums’s tutorial that it ever occurred to me to bend them to the inside.
Hey, please keep the tips coming. Hopefully I’m not the only one who doesn’t have a clue about these sort of things.
Thanks for the great tips. I’ve just recently discovered the world bag blogging and I’m learning so many things that my head is bursting with all the bags I want to make. The source for buying the snaps is great..thanks.
Wowzer. I was AFRAID of attempting snaps! You’ve made it not so much ‘easy’ but, MUCH less scary! *LOL* And for that I’m grateful – keep up the wonderful work! I can use all the help and tutorials I can get! :o)
Blessings!
This is almost exactly how I put in magnet snaps and it works great. I know what you mean about having had to learn by yourself along the way. I have been lucky to be able to call & ask my mom for advice on some sewing things, but some of it I have just had to learn myself or figure out myself.
Thanks a million!!! I just bought some magnetic snaps but they only came with ‘skimpy’ directions. They must be popular right now as they are always sold out.
Joni
Great tutorial! I hadn’t thought about doing a buttonhole stitch at the prong placement–great tip! And thanks for the tips on where to get magnetic clasps–I’ve been looking for a new source for these. My local craft shop only ever has two in stock and charge an arm & leg for them…Hope you have a great weekend! :o)
Thanks for sharing the info. I have never felt it necessary to button hole the edges, I thought that using interfacing was enough to stablize the opening. Did you start to do the button hole reinforcement due to a previous failure?
I am also an outward prong bender. The online source is a great help, they are very hard to find at local shops and pricey.
Great tips. Thank you. Have never used a buttonhole as reinforcement, will need to try that. Another source for the magnetic snaps is Joann’s – they have a six pack 2 gold 4 silver for 2.99. They are found in the racks with all the odds & ends under the Joann Essentials name.
That’s a great idea!!!
Kind Regards,
Sonnja
Thanks for the ebay source. I just bought some. Never have been able to find them at Joann’s and Michael’s is always out and expensive. Thanks for the tips, too. I’m probably too lazy to do the buttonhole stitch but I will start using interfacing. Smart. And if you’re taking a poll, I fold them to the inside too. Keep those tips coming!
I wish I’d found your tutorial before I made my last bag! I did it pretty much like you did, but the thing didn’t come with any directions!!! I did bend the prongs outwards though. I’ve bookmarked your blog. Love it!
Dana
Awesome! That’s a great tutorial, I’ve never used a magnetic snap but I want to make your diaper bag for my baby and I will definitely use this!
Pingback: me being crafty » Magnetic Snap
You’re such a pro! And so sweet for posting this tut. It took me months of bag making (all the while using buttons/buttonholes for closures), before I attempted the magnetic snap. Why was I so intimidated? It’s nice of you to post this for others just starting out.
Another great source for snaps is this website:
http://www.rnllee.com/
I’ve been using them for over a year and they are wonderful. Inexpensive, quick, and great service. I highly recommend them. Their quantity discounts are really good.
Cheers!
I love the button hole tip! That’s brilliant! Here’s an addition to your tutorial to perfectly place the snap on the other side (the other piece of fabric). Before placing the snap in the fabric, align the other piece of fabric in the direction it will be stitched and pin the two together (two pins will do – just to keep them together). Then take a pin and push it through the dot you marked on the first piece of fabric so it sticks through to the second piece. Flip it over and slide the washer for the other side of the snap over the pin. Align properly and mark the fabric where you will place the other slits. Unpin the materials and continue to prep for the snaps (whether you use the buttonhole or the stiff interfacing). Now you will have perfectly positioned snaps on both sides without having to eye-ball it! 🙂
I love magnetic snaps and you have great tips here. I never thought of button holes either but I use interfaced fabric with an extra piece of stiff pellon, I mark the slits with a marker and put fray check on them. I push outward though. Just never thought about pushing inward.
There are always new tips to learn no matter how much we know. Keep them coming. I’m an etsy seller too!
Thanks for such a lovely clear tutorial – I’ve been wanting to use snaps for a while, but had been feeling a bit intimidated by them, but actually you’ve made it look quite easy! Thank you!!!
you should write a top tips manual!
You did good on the buttonhole application…gives extra strength.Now..another source for purse magnet snaps and all kinds of fittings…pick up all of the purses you can find at tag sales..garage sales thrift stores…etc.”harvest” all of the fittings very carefully …straps pockets zippers ..the actual pattern of the bag too if you feel that you like it well enough…just a note from a packrat sewer…
Thanks for the fabulous tutorial! I just installed my first magnetic snap, and it was a piece of cake, thanks to you!
Pingback: I’m Super-Hip! « that*darn*kat
very helpful tutorial. i’ve been using magnetic snaps and folding them outwards…i’m going to try folding them inward! i always get my magnetic snaps at joanne’s…they come in a pack of 3 for under $2. that’s the cheapest i’ve found them. they don’t show it online. but i’ve found these packs of 3 where they sell the handles for making purses. keep giving tips!!
Pingback: Purse Firsts « Southern Girl Musings
Just thought I would leave a tidbit about where to buy the magnetic snaps at a real reasonble price and purse handles too. Jhittlesewing.com. You can sign up for weekly newsletters and they have tons of stuff to offer. You might want to check them out for buying on the internet. Thanks for the tips on snaps. It was an AHAH! moment for me……..
Very helpful, thanks!
first purse attempt, and my magnetic snaps didn’t come with instructions… I just wish my mom’s 30+ year old machine would let me buttonhole! Will dab on a bit of fabric glue on the slits. But when I get my new machine (August!!!) then I’ll definately reinforce with your advice.
Thanks for the info. I found this from just doing an internet search. I’ve never put in one of these, but now I think I get it!
Pingback: Spring Fever: Tokyo Tie Bag «
Great idea to do button holes! Really makes them sturdy! I use fray chek around the openings and have had a good run:>
thanks for posting your instructions and tips. I was fumbling all around these snaps. Thanks for sharing.
hello there!
i couldnt help but notice that you noted paying ~$1 a snap.
if you log onto beingbags.etsy.com, this etsyian sells her snaps for ~55 – 80 cents per 18mm snap whether it is a antibrass, brass or silver/nickel material. the pricing varies with the quantity you purchase of course.
i hope you find this helpful!
=)
Thanks for taking the time to post your tutorial. It’s great and I realized that I’ve been doing my snaps backwards.
I have discovered that you can use the female section of the snap as purse feet. It looks beautiful and I finally have that professional look at the bottom of my purse.
Hello 🙂
Thank you for the helpful tutorial. I am an absolute beginner in sewing, and I am deeply grateful for these tips…
I had, however, a question on the snap buttons topic. I usually sew the lining of the bag separated from the outer fabric and interfacing, which are together, and then attach it just at the top line.
If I place the snap closure on the lining, won’t it have a weird effect, like the lining bending inwards and the outer layers remaining wide open as before?
I hope I made what I mean clear enough. I apologize for my rather inadequate english… 🙂
Thank you so very much for your help,
Linda
Pingback: Snazzy & Such » Blog Archive » Tutorial Tuesday: Installing a Magnetic Closure
Thank you for sharing your knowledge! I just bought the snaps at Joann’s and had no idea how to install them!
I just started using zippers. Does anyone know how wide the tape of
a zipper can be. I use a 22″ to 24″ plastic zipper but I find myself
wishing for a wider tape area when I am attaching it..I have been using a walking foot on my singer machine. I an gonna try the zipper foot, but I am afraid that the needle will breake easier!!! I use heavy fabrics. Any ideas??? I cannot afford a factory machine, just yet.
Thanks, M.Mera
Thank you so much!!! I just made a purse that called for a magnetic snap and the pattern just said to install according to manufacturer’s instructions, which of course there weren’t any. So I got online and found this. It was perfect! The snap works great. You can see the purse on my blog. http://www.janinesjewels.blogspot.com
this was really helpful. making button holes is a great idea but i’ve never been able to get the button hole setting on my machine to work right, or i just don’t know how to use it right. i’m just teaching myself how to sew. i’m making my first purse now and was looking for instructions on attaching these snaps since the package didn’t have any. i also want to let you know that i got a package of 6 snaps for $1.50 at JoAnn Fabrics store. thanks for the tips!
Pingback: Trying New Things and a Great (and free!) Project « Sarah’s Weblog
Reply to M.Meara –
You may want to try widening your zipper by attaching ribbon to it and then sewing the ribbon to the fabric. Grosgrain works well – this is also a neat way to add a little color/pizazz to your project.
Thanks for sharing! I just made a wallet last night and had some of these snaps on hand and wanted to put one in…the darn things didn’t come with directions and I was pressed for time so I just added a button closure instead. Now I am excited to use up some snaps since I know what the heck I am doing…lol:)
thanks again!
I know that at ETSY – handknit168 is quite cheap and the price is OK.
http://www.etsy.com/shop.php?user_id=6127821
You can buy 10 sets, 20 sets or 50 sets from “handknit168”, or even you can request your order volume.
50 pairs of 14mm Nickel magnetic snaps;
USD10.50 + USD7 = USD17.5
50 pairs of 18mm Nickel magnetic snaps;
USD12.50 + USD12.5= USD25
If you are looking for great prices on Magnetic snaps, there are some great prices on a new website that I found. They sell in quantities as low as 10pcs @ .90/pc, and go down to $0.70/pc at just a hundred snaps. They also have very resonalble shipping. It was only $4.50 to ship 50pcs I had bought just recently. I was also impressed with their shipping time. I had my order to me in only 2 days.
Worth checking out if you are looking to use these often or just a few at a time.
http://www.pursesupplydepot.com
OMG i am making a purse for my friend and did not know how to put on the magnetic clip. now i know where to get the clips and how to put them on. thanks a million please keep posting new tips i could use a few
button holes…..never would have thought of that……..thnks
Thank you so much for your tips! I just installed my first magnetic snap and it was a snap! 🙂
Pingback: Pink Chalk Studio » Blog Archive » Birdie Sling Done!
Pingback: Tutorial: Adding a magnetic snap · Sewing @ CraftGossip
What a great idea to put the buttonholes in for reinforcement. I never would have thought of that, but sure plan to use this idea when I make my next purse.
Thanks for giving the good source for magnetic closures, too.
Sandra
I’ve had these snaps sitting around for over a year wondering how to apply them.. decided to google it today.. THANK YOU! :]
Geez…I bought magnetic snaps…am I a moron or shouldn’t they come with instructions….thanks for all the tips and great tutorial!
Your instructions(magnetic snaps)was a huge help. Been sewing a long time, but adding magnetic snaps….with no instructions was not a snap!
Thanks, MJ
Pingback: I finally finished the Birdie Sling! « Sew La Tea
Pingback: Magnetic Snap tip from Craft Apple «
Pingback: Using magnetic snaps « At Random
Fabulous tip!!! I’ve done the eyeballing the spot and just cutting slips for the button. Now my button is falling out. I can’t wait to use this tip! Thank you!
I jut wanted to say thank you for writing this post. I have never used magnetic snaps before and I had no idea how to install them. This post helped me out so much! Thank you thank you thank you!
Pingback: How to Install a Magnetic Snap Tutorial | Picking Up Threads
Pingback: Oh My Bettie » Blog Archive » How to: Magnetic Snaps
Thankyou so much , your directions are very easy to understand and great pictures. I had this big idea of putting these magnetic snaps on my polarfleece bags until I realized I really didn’t know for sure how to do it. Thanks again!
Thanks a ton for the site for the magnetic snap. I went to Handcock Fabrics today and they were $5 a set!! What a rip off. Thanks again.
Awesome tip! Thanks!!
Thank you so much for posting this! I’d never ever attached a magnetic snap and I certainly would not have thought of sewing a button hole (especially since I’d never done that either!) but with this tutorial, I think I did a pretty good job on my first snap 🙂
I was searching the internet trying to find a suggestion for covering up the magnetic clasp. My sister is making felted purses and does not want to line them. The magnetic clasp shows on the outside of the purse. Does anyone have a suggestion on how we can cover up the clasp? Would be appreciated.
Have you thought about sewing a square of felt over the clasp back? It would be the perfect place to put a square tag if you had one. Or an embellishment – maybe a flower.
Another option: if you make the closure a tab that goes over the top of the bag, you could line the tab and just stitch a piece of felt over the clasp on the inside of the bag.
Just my thoughts. :o)
Thank you for posting this. It really helped me. I’m in a crunch to get some amy bulter bags done for Christmas and the snaps didn’t come with instructions!
thanks again.
Waaaayyyy better than the instructions on the back of the Dritz box. Thank you!
I just started making bags, and with that using magntic snaps. I love your idea on the button hole. My problem is though, I have never done a button hole… ??? How about you do a tutorial for that, as I love you page and your easy to follow tutorials!!!! 🙂
I also bend the prongs inward. Just like you I am also worried about the snap ripping out one day. That has happened in boughten bags before and it so ugly. I reinforce the snap in the bag with a piece of batting. The lady from JoAnn’s told me that trick…
Keep blogging please, you are great!!! THANKS!!!
I just finished a wallet design and was going to use magnetic snaps BUT after reading some these posts I think I will be looking for another type for the wallet. I thought about interfacting for durability but what is timtex for a backing??? Flexible plastic??? I guess I will google it. Boy what would we do without google
Pingback: How to Install Magnetic Snaps
What a great tip on the snaps. I have been searching for a non hand sewing snap for purses. Do you have any tips on a purse bottom stabilizer? I can’t afford $9 for a Bag-E-Bottom.
I appreciate your tips.
Celia,
My suggestion for purse bottom stabilizer is go to hardware store ask person to cut plexi-glass to the various sizes you need for each of your bags you make. Real Cheap to have done.
Pingback: Something old, something new…. « Owl Take It
Great tutorial! I used it on my new spring bag which will be on my blog 16/3.
Wow…I wish I would’ve found this before I tried to install the magnetic closure for the first time! I had no idea what those plastic things were, figured they were there to keep the magnets aparts, so I threw away! Thanks for all the great tips!
hheey umm for skool i have to make a bag and i decided to use a magnetic snapp but the ppl at the material place gave me one that had plastic around it im not sure how to sew it plzz help. by the way its not like the onne you used
Virginia,
It sounds like you purchase a sew-in/hidden magnetic snap. It basically has a round / flat magnet inside covered by a square plastic. It is installed between the lining and outside as a magnet that isn’t seen. please email me (through my website) if you have further questions as there are many ways to install it.
El
Pingback: The Accidental Crafter » Blog Archive » Sew Spoiled Weekender Tote Sew-A-Long: Pockets and Magnet Clasp
So thankful I found your tutorial! I have been too scared to sew in a magnetic snap, but have really wanted to have one on a few projects. So thank you for guiding me through this tonight. Now I’m not afraid to put these in my sewn items! [the first item I made was a fabric envelope/pocket to carry my thin Bible, pen and notebook] See it @ http://mrsmustakas.blogspot.com/2010/09/bible-pocket-ive-wanted-to-make-one-of.html
another satisfied sew-er thanks for the info on magnetic snaps!!!
Thank you for your helpful tutorial. I’ve used it to insert a magnetic snap in a handbag : http://just-chic.blogspot.com/2010/09/why-not-bag-collection.html
Thanks just the information I need to install the magnetis snaps.
Thanks
Pingback: Birdie Sling Diaper Bag: Modifications « DohDums
I am confused. What side of the fabric do you put it thru, the front or the back? Do you ever do a video showing how you do something, I think a video would help me with this.
I made bags and I want to put them in as well, but still can’t figure this one out. lol
I forgot to check the notify me of the follow-up, late night. lol
This is an excellent tip. Using a magnetic snap can be very useful. Thank you for showing how you installed it.
Excellent tips! Thank you! and I totally know what you mean about there being a lot of info out there, sharing techniques. But we always learn something new from each person’s method (even if you don’t feel like a professional) so I’m glad you shared with us. I learned something new! 🙂
That was so easy, once I figured out the button hole function on machine again! Thanks! I’ve been meaning to button-hole and attach snaps…and never got around to it. You helped me kill two birds with one stone.
Your tutorial on installing magnetic snaps is SO AWESOME! Took the fear right out of me, and I installed my first set of snaps correctly and they turned out beautiful! your instructions were so clear and so very easy! THANKS for sharing your insights on this 🙂
Pingback: Pattern Review: Amy Butler Birdie Sling « Hannahbella’s Weblog
Pingback: My First Major Mistake | Sewing Novice
Thanks for the tips and tutorial! I used this to help me with a snap for my Kindle case (even though I messed it up) the snap still installed easily thanks to your help. Here is my post about it (http://sewingnovice.com/2011/01/27/my-first-major-mistake/)
Pingback: Kindle 3 Case | Sewing Novice
I find J. Hittle to be the most economical place to purchase these magnetic snaps
Pingback: magnetic snaps « Crazy Blue Cat
What size magnetic snaps to you use on your purses. Do you use the slim ones? The ones in the craft section at Joanne’s are so thick I have to put them lower so I can top stitch. Thanks
Pingback: Magnetic snaps | Teenfashionsite
Pingback: The Olivia Bag Tutorial | Dixie Mango
My purse was made out of duct tape and I still found this helpful… thanks! =P
Good to know! Glad it worked. 🙂
Thanks for the instructions. I’ve never installed one and really couldn’t follow the manufacturers directions. Your explanation was perfect.
That’s good to hear! My first set didn’t even come with instructions. 🙂
Pingback: In Case You Missed It: Comedy, Fashion, and Art | Yahoo! Accessibility
Love these instructions and will try this method soon!
Pingback: The World Surrounding Me » Blog Archive » Mini Purse & Earbud Holder
Wonderful, it never clicked to sew the button holes. Thank you
I didn’t read all the posts so forgive me if you hear this already. Any time you buy at ebay always check the free ship box. Many sellers offer free shipping if you do your search with free shipping. I just did and found most magnetic snaps for about 50 cents each.
Thank you so much!!!
THANK YOU! I’m making an Amy Butler bag and her instructions say to “follow the manufacturer’s instructions for installing the magnetic snap.” Well, my manufacturer didn’t include any instructions, so this is incredibly helpful!
You’re welcome! I’ve never bought a snap that had instructions which is why I made the tutorial. 🙂 I’m glad it was helpful!
A very useful tutorial.Simple,efficient and with picture for instruction. Great to find it out and will share it to our friends!
You saved me ! Thank you. I crochet but can use this with a piece of felt or material in between.
That’s a great tip but I am using the type of magnetic snap that has to be sewn in and have discovered that if I sew it using the button stitch on my machine it will all just pull back out. How do I secure the stitching?
Pingback: Sewing: The recap | Upon the Waves
Thank you for the tutorial and the link for the purse supplies!
Pingback: DIY Project Zebra Clutch | fafafoom.com
It’s really a great and helpful piece of information. I am happy that you simply shared this helpful info with us. Please keep us informed like this. Thanks for sharing.
Thank you, this was a great help.
It waill come in handy for future projects.
Attractive element of content. I just stumbled upon your
site and in accession capital to assert that I get in fact enjoyed account
your weblog posts. Any way I’ll be subscribing in your feeds and even I achievement you get right of entry to persistently rapidly.
I have been exploring for a bit for any high-quality articles or blog posts on this
sort of area . Exploring in Yahoo I finally stumbled upon this site.
Reading this info So i’m satisfied to convey that I have an
incredibly just right uncanny feeling I discovered just
what I needed. I so much indisputably will make certain to don?t overlook this website
and provides it a look regularly.
Thanks so much. I have been sewing a long time but didn’t know about the snaps you were talking about. I just made two bags and will be using the snaps instead of Velcro to close them.
I am so glad that I viewed this site. My snaps did not come with instructions and your tips were much better than what would have been provided. I will definitely use the buttonhole process for my bag. The quilted fabric wallet pattern recommends using magnetic snap so I was surprised to read the comment stating that it may effect the integrity of credit cards.
Thank you, thank you, thank you. I just purchased snaps and there were no instructions. Even if there were, I’ve found that often one person can explain in a why that makes sense even if other instructions didn’t.
Pingback: How To Apply A Magnetic Purse Snap | Information
Thank you for this! I’ve never tried putting on a magnetic snap because I was afraid…Haha!
So you’re instructions are perfect, and now I’ll try it!
Thank you!
Oops! Your instructions…Not “you’re instructions”